Leaderboard

Hi 420SA, We are a new local seed bank, with a few groovy cultivars on offer. We look forward to being part of this community and growing together. iRiE TO THE iRiE!

So some pics, below is the plant last night after spreading some pollen on her: Then this morning I hosed the plant down to try get rid of any lose pollen, no change in colour yet on the pistils / stigma. Will see tonight, I believe it happens within 24 hours. I moved the plant back into my grow area after hosing her down.

So these arrived today. Samsung Hinflux SO2 strips And I also bought a MeanWell HLG-185h-C1050B to power these guys still waiting for that. I hope I did the calculations right. This light should be a 155.4 watts 3000k. Sent from my VTR-L09 using Tapatalk

The end is near. About day 52 stopped feeding will do a real good flush in the next few days

Looking good buddy, i agree with @PsyCLown . Wouldn't do any trimming just yet, instead rather just bend the fan leaves under other leaves to let light through to lower leaves. I used to love getting in there and start snipping, but the guys here advised me otherwise and its been for the better. See pic below of example how i bend leaves instead of snipping them.

Yesterday's warm sun really did the girl some good! Amazing what some sunny weather can do!

So this is how far I got today. Mounted on t aluminium strips Sent from my VTR-L09 using Tapatalk

That's correct, I think they have an hour or two to take you to have your blood drawn for the court case. Sent from my Redmi Note 7 Pro using Tapatalk

Isn't an alcohol breathalyzer just used as an indicator for police to test you further by blood? In other words breathalyzer results can't be used as evidence in court, only the subsequent blood test results can be. Or am I wrong? if that's the case the same should apply for cannabis and if so... well then they fucked...

Well now you making me think... This is my 1st grow, so not sure how big she'll grow lol! I believe outdoor plants only start to flower in Jan - March, properly from march. So you still have a few months of veg time with her if you're doing it outdoors. You could cut it short by only giving her light for 12 hours and then bringing her inside for 12 hours and making sure she gets no light for those 12 hours. Then you can flower whenever you want to. 20L should be sufficient then.

Will keep it in pot but move outside when needed... Weather still not too great to plant outside just yet... Got some cheese and skunk beans that will go in the back garden late next month... Will start germination next week. I'll look into getting some 20l or bigger plastic grow bags this weekend and transplant the lady...

AS promised, here are the pics of the plants i moved outside. Some were stunted at first, but they all seem to be adjusting now.

Looking good, I don't think you need to do any trimming yet. Up to you though. You will be flowering outside too? Will you be putting the plant into the ground or keeping it in pots? It will need a larger pot soon.

...

Getting really bushy... Will give it a week or so to see if some trimming's needed.

So upon further inspection, I noticed that some pollen sacs had cracked open... inside my veg area which is where I am keeping my auto's. I did not have time to move them to the new tent yet, so fuck it. Took them both outside, picked off a few other cracked pollen sacs and sprinkled the pollen onto the pistils of my female plant and wiped down my grow area a bit as best as I could. Both plants will sleep outside tonight, tomorrow morning I want to try hose down the pollinated plant and leave her outside to dry and then she can go back inside the flowering area. I did get my new lights up and running, have them in my veg area and have taken the QB out - so that is ready for the new tent at least. I really hope no pollen has gotten and is going to get onto my flowering plants, an indoor grow with seeds is extremely annoying! Such a waste. The next STS spray will be on Wednesday evening, although I may give it a skip until I start seeing pistils on the Charlottes Angel.

i got my bottle ready mix of calmag foliar spray, spray them about 2-3times a week. havent had any issues with calcium since i read this a few weeks back. Thanks once again @highchome

...

I smell plenty of problems that could arise out of trying to implement this... The startup behind the world's first dagga breathalyzer hopes to start selling it soon – here’s what the company says it can do https://www.businessinsider.co.za/hound-labs-marijuana-breathalyzer-startup-raises-funds-publishes-study-2019-8? shared via @News24

Oh hell yes. Those look damn good man Sent from my FIG-LX1 using Tapatalk

God journalists in this country suck, that article is full of slang, just makes reading it near impossible.

"It also had some limitations, however: Researchers didn't compare people who'd smoked against people who did not, for example, and the results varied pretty dramatically among the participants, which could mean it's still too early to come up with an objective numerical figure for "impaired" cannabis use." Device is useless unless there is an objective legislated number based on scientific evidence. The way I understand it, it's too bad even in California marijuana is still federally illegal therefore they cannot perform sponsored third party studies in order to find what that number is.

Thanks Dank, been reading through some posts and yes, the community looks awesome! Lots of knowledge here. Rolling one as we speak

No, end goal is to keep her in pot... Next grow will be in the ground fully outdoor. Oh ok, but you will be flowering her outside? So still a long time until she starts to flower so she is going to get BIIIG. I do not think 20L will suffice, you will need to go bigger I think, although you can use 20L for now.

I agree with @Smelly Joe anything below the scrog net I would clean up, so remove the smaller branches and leaves etc. Look at what my plants looked like after I cleaned them up: Looking back at those pics, they have actually grow a looot since then too!

Ahh ok, so the end goal is to put it into the ground? Yeah, 20L should be fine then and then afterwards put it into the ground. Even 10L may suffice for now, just until the weather improved a bit.

Welcome guys

So when you take cuttings again, give this a try - even if it is only on some and not all of them. Put the cuttings straight into some tap water, leave it for 12 - 24 hours (not longer) and then put your cloning powder / gel on and then into the eazy plugs / jiffies / soil / bubble cloner etc. DO NOT cover them with a humidity dome but keep them in your veg area. You will not have to baby them, they will not flop down and will root pretty easily. I am now using a bubble cloner, I much prefer it over jiffy pellets and rapid rooters and soil. I like that I can watch and see when there are roots and it's super easy, no maintenance required at all. Just put them in and leave them until roots have formed then plant them. I created a thread where I built my bubble cloner, it's really easy and not all that expensive. My success rate has been super high. So far the only cuttings I had to throw away were the 4 corners on in my bubble cloner - when I tested it I realized there were not enough bubbles getting to the corners and then 1 cutting I took from a plant which was very unhappy. I did not take good care of the cutting either so it was tossed. The rest have all taken or are still alive. That is over 36 cuttings so far.

Welcome, I guess we shall receive a link once you are signed up as a vendor?

Welcome to the 420SA forum, enjoy the stay, roll one up, awesome community here.

@Trailblazer420were are you located. I have 3 x 50 watt 220V cobs that I don't use anymore with 3 x 220V fans. If you want for FREE.

Looking schwifty bro. What led strips are those?

There's 2 answers to that question : TECHNICAL : 1: Any light that leaks into your budding section will cause plants to have a delay on the flowering or if you have a finicky strain it might not start flowering or get a bitch fit and hermie.... I know hermie gets thrown around a lot but it's there and not something you want dangle some light in front off. COMMON ANSWER : 2. Don't worry to much about it. I have grown outdoors with some light from a security light giving a slight hue with no ill effect. You do need to check your plants and see if any part of the plants are growing different than others that is more darkened. Is there no way to seal it off. I know they sell allimuniun tape at builders etc that you can use and still have reflection. I hang towels over my tent to make double sure that no light gets in when lights are off. Sent from my FIG-LX1 using Tapatalk

Do iiiiiiit!!!!!

All colour is back and it's smooth sailing again. Big reschange today... So that's also a good thing for them. 1 and 2 left and right

Day34/ 24/8/19 I up-potted all seedlings into 5lt bags for the interim and I'll be topping all and make clones out of the tops, they pushing out the 6th set and I'll wait till the tenth befor I consider topping them. Meduim is 50% coco/perlite and 25/25 compost and earthworm castings and amendments, I got a slight burn on some girls but nothing to worry about thankfully.. fed with 25ml kelpak, 25ml biobzz, 25ml soluble silicon and 25ml amino mix per 20lt, never used the last 3 before but the noticeable spurt in growth is immediately noticeable as you'll see in the one stem shot....

Okay so because this will sorta be Perpetual... Not in the sense that I will have one tea and keep it alive... But I will be regularly making teas, my aim is one a week to super beef up my gardens biolife, but we will see how it goes! I have one on the go now, so let me give you a few pics. First one is the day I mixed all the ingredients, and the 2nd Pic is the teeming micro life on the compost sock. I will be up pretty early tomorrow to water it on my ladies, and my little veggie patch... And the rest of my garden. 18l of this vortex brew is enough for an entire farm!!! I'll be using it in quite a bit less diluted... Pretty much full strength

Those are just pistils, does not mean she is flowering. If just outside, she will continue to veg until next year sometime when the hours of daylight become less.

Pic 1 and 2 cant tell, resolution is poor internodal spacing is still even, possibly indicating that the plant is not sexually mature yet-wait for them to show. Pic 3 and 4 looks def like pistils- female. Pic 5 might be pistils coming through. Sent from my SM-G900F using Tapatalk

Just an update on my White widow ladies, they getting lekka bushy now. 1st pic is above the canopy 2nd is below the canopy. You can see where her main branch bent when trying to keep her under the net, eventually it died of, so i cut it off. doing ok now though. flipped them earlier this week. They are in here with 1 super skunk kush and 3 Lem skunk, so 6 plants in total. Think on next grow i will put only 4 in this section as it gets a bit crowded.

I agree 100%, that scrog is looking tops. The canopy is extremely uniform. I really need to use my scrog net next time!

Some shots before the lights went on day 45. I also took a bunch of clones Big Budha Cheese, Jillybean, Jolly Rancher and Zsweet Inzanity. Started some seeds 1 Aztec Rain already came up and 3 Blueberry Indica x Heribei some of these will go outside.

I need to get me a proper camera... taking pics with a LG G6 but they do look like little long spearheads and a very different from what the male showed a day ago... I'll check again after work today to see if its developed any further...

What did the culled ones internodes look like ? I don’t see anything in the above. Take closer pics near the internodes and focus the the camera

Jip, that's a boy. Sent from my SM-G900F using Tapatalk

Appreciated dude, but im tapped out until next payday, even though i do need to increase the light in my budding section. Vegging section is nice and bright, looks like daylight in there. Budding section seems to be lacking a bit oh yeah, almost forgot. I made a separate section yesterday for seedling and clones, nothing too special, but it should work. Could always just add a few more cfl’s

That plant looks like it would loooove some sunlight... Where is it currently and how much light does it get?

Not sure why the leaves curling down on the one node and feels a bit hard as well... Should I snip it? New growth also coming along quickly. 2nd shorter plant looking very healthy with no issues... Just wish it would come out of the closet and show its sex lol! The last 5 pics is 2nd plant.

Also if you are doing a hydroponic/coco grow the calmag takes up a chunk of the target EC/ppm, esp for seedlings. I use a lower than suggested amount of calmag to fertigate and then do a folia spray daily. So far I've seen no Ca/Mg deficiency issues.

A lot has changed since the last update. This is just shy of 60 days from germination. Looking ok overall. Quite happy with the size of her, especially when compared to my first auto outdoor that only yielded 5g dry.