Leaderboard

I have finally cleared the backlog and my veg tent is going to be empty from tomorrow. The slurricane mother has been my favorite plant this year, and keen to see her offspring.

Day 10. So two seeds of each planted. Only one of each germinated. If you look on the bright side it's a 50% hit rate. Ah well, you win some and you loose some. But in true DAMMIT DAVE style, loose one, plant another two. Indoor grow appearing soon on a small screen in your hand. The x Slurricane is reaching for the skies, almost double the height of the x Ghost Train. Plants have been getting yard time since they broke surface then under light so 24/0. Could it be the light or a stretchy plant. Suppose I'll find out with the indoor run. Hoping to move them to the shade house end of the weekend. 4 x 20l pots take up all my veg area. Sent from my DRA-LX5 using Tapatalk

Bruh imma be reverse image searching every strain I see now

We should first confirm it's PM. I'm not convinced yet. @CreX

@Bakstein420 Problem is they are ready to be cured as they are dry now. The others not far behind. Washing them and getting them wet again probably not such a good idea?

You could do a bud wash, that should stop any shit spreading inside the jars.

Morning Gents :D So everything going very well until this morning when I came across this in the drying tent. Firstly, it is PM right? 2ndly, any suggestions on what I should do now? The plants are whole (small plants), been cut and have been drying for 12 days now, snapping when I break the stems to tell me they are ready. The PM is only on the top of a couple stems that are hanging upside down drying. The others are fine for now. I think I caught it early as I never noticed anything yesterday. Drying temp has been between 21 & 24 (figuring ways of getting it colder) and RH has been between 50% & 62% (most of the time it's been at around 52%). We had 2 days last week that were very humid , like 87% ambiently), and it pushed my dry tent RH to about 64% for those 2 days. Probably where it came from. So guys, now what is the best tactic here? I'm very happy with the way my buds turned out and it would be a travesty if PM were to fuck this up right at the last minute! PS - the few that have this PM on their stem are ready to be cured. Is there any way I can stop it spreading to the others that are still hanging, and from spreading inside the curing jar to the buds? I do have a collapsable dry net, should I clip buds off the stems and transfer to that?

So to be blunt - yes you can definitely harvest - trim - and jar on the same day do you want to? no. the reasons are as follows. the bud has way too much moisture in it - if you jar right away, RH would hit 100 in a few min, yes... minutes, so you would need to leave the jar open anyways to wait for the rh to drop to an acceptable level, which will be in a good 3- 4 days minimum. if you neglect the rh even for a moment... mold and pm and budrot will set in like wildfire! so not ideal the buds may feel dense on harvest day, but even the densest buds get all soft and squishy the first few days of drying and water loss, so jarring them will likely end up squashing the buds in their moerin..

@Ill_Evan hectic! I never knew that. Will definitely be keeping those indicator cards out of the jars! Will rely on my mini hygros. Thanks!

Perhaps a better question, then, is: Since drying is always requirement, but is not necessary to be dried all the way, at which point do I know that the buds are ready to go from their minimum dried state into jars? I do read all your answers I promise, just learning here and want to be sure. I am grateful for your time. Thank you

Nice one Psyclown. I've read over a few times but to me, it was still unclear whether I can take the buds straight from harvest to jar, no drying at all. or only that it's fine now because they've been drying a while... Sorry, sometimes I need it to be spelled out as there is not much room for error in this, LOL, but thank you for clearing that up :) Also, good to know it cannot in any way, ever be nutes coming out the stems. Budwashing sounds like a good step to add as a preventative and after a little reading, it looks like it's a good practice anyway, will do in future. Thanks I still think the packs could problematic though. I left some weed in a jar over 2 days now with a 62% pack, and it's way too dry in there now, like under 50%. Ambient RH is higher than what's in the jar. The lids and rings are new, no leaks. I've tested now with 4 different mini-hygros. But the proof is in the pudding -the weed is too dry, not nice to work with. Also has become a little harsher..... IDK. I think I'll use the packs like a desiccant to bring RH down inside jars, then remove them once at 60% and monitor. If they get over 65% I'll put the packs back in again They are old packs also, about 3 years but don't know if they can expire. There aren't an exp dates on the packs.

Seems @CreX has already give you all the info but that is not nutes and appears to be some type of mold. The plants are not like a storage tank where they keep the nutes just like that, I have harvested plants without ever doing any flush and never had that happen. It is not nutes. It is also not PM... PM looks very different and usually starts on the leaves. Doing a budwash before drying can help as it may get rid of spores already on the plant as well as other shit too. You always need to and want to hang the plants up to dry and lose majority of their moisture before you put it into the jars. Best is to use a hygrometer to monitor the RH once in the jars and ensure the Integra / Boveda maintains the RH in the correct region, if it is too high then you can "burp" the jars by leaving them open for a while and then closing them again and then monitoring the RH - if its still too high then you continue this process until enough moisture has been released that the Integra / Boveda is able to maintain the correct RH. As for the Integra 62% being lower, it could be your hygrometer is not that accurate or perhaps the lid on your car does not seal properly.

its not PM, its mold 100%

LOL and stop tasting the shit man hahaha man thats actually funny hahaha oh and a budwash is a good practice if you feel that your harvest may be tainted by something. as for your concern about inside the jars, you must manage the RH. either manually with a hydrometer, or with bovidas or some kind of 2 way humidity product. pm and mold will grow in RH higher than 67% so get some 64% sachets and some 58% sachets.

It's worth mentioning I just tasted it with tip of my tongue, thinking that if it's salt, it should taste salty? It does not But not sure if ionic salts taste salty, though? Jury is still out LOL

The earliest auto flowering i had started around the 3 weeks. This is what she looked like below. And she didnt turn out too bad. And this was with my basic floodlight and sun. So i would think theres still some hope bro.

@Ill_Evan Okay thanks. Yes, very handy to know what I'm working with here first LOL @CreX any advice is very appreciated :) I'll hold off on doing anything that can't be taken back in the meantime. For now though, I think the ones that are dry are going to get trimmed into neat little buds and placed into a jar. I'll label it PM so I know to watch for it in that jar especially.

Right now the plan is: 1 - Identify and separate the few that have mold on their stems. These are ready to be cured already. I'll trim the buds nicely and throw them inside jars with Integra Boost packs (I have 55% and 62%). That should keep the humidity low, and starve the PM. Hopefully? Any thoughts here? 2 - The others (most) that are not showing any signs of PM, as far as I can see we have 2 options: Option A is to just cut all stems away, trim down into buds, and finish up the drying process with my DryNet. I was trying to avoid this because flipping buds so they don't go flat sounds time consuming. AND Option B is to make a strong solution of copper soap, then wipe down the stems with it. Try get the RH down in the tent as much as possible and hope it doesn't spike in nature, then hopefully finish the process. I'm just concerned as to how I'm going to stop the PM from spreading inside the jars among the buds.... Eish....

Il still recommend using microbes, Jamie's has CMC (cannabis Microbe consortium), it just help adding in once a week. When microbes are bountiful they sort out the pH also Sent from my F5321 using Tapatalk

All the pics are always above ground, so thought I would mix it up. If i blur my vision i can see a pugs face in the centre of the root mass

Pest control Sent from my DRA-LX5 using Tapatalk

I may be wrong but the way I understand it, when the plant is in flowering mode it focuses more on the buds than roots so I don't think you need to put in another pot, a few roots at the bottom is fine. As mentioned above rather water less more offen and check PH. Do you feed the soil microbes? Sent from my F5321 using Tapatalk

Looking at the pistils again and I've realized you are not actually that far into flower either, my apologies... However, potting up almost always comes with a decent amount of stress.

Think the light was to high. Have dropped a bit. Sent from my DRA-LX5 using Tapatalk

The more I think about this, I feel as though there may still be a little misunderstanding here. I mean, I know under normal circumstances one definitely wants to dry before curing. To explain better, I mean in my current situation where I already have mold inside the tent on the drying pieces, I was unsure of whether I should, as an emergency tactic, skip the drying phase on the newcomers to the dry tent to avoid the mold spreading to them, and wanted to know if that's what you meant. But since then, that had already been made clear to me by PsyClown earlier. They still need to be dried. Thanks, though. Cheers

yeah it has to be salt buildup - no other explaination - taste wont be neccesarily salty just because the compound is in its salt form, so the taste will vary greatly on what makes up the salt. I Think we got this one busted hey, hopefully one of the heavy hitters will confirm the theory (this reply was meant to be posted directly after my last but data kakked out)

Pretty much, except Integra provides those little red dot indicators which is made from using cobalt chloride, which is a carcinogenic. So Integra can kindly fuck themselves. Boveda all the way.

So most people like to use the bending of the stem to tell how far it is with regards to being dry. This is a decent guideline but I have jarred bud where the larger stems did not snap. I also use the RH inside the drying area (I used a tent) as a gauge. I compare the RH inside the tent to the RH outside the tent and I have a PC fan blowing air from inside the tent out to ensure there is air flow and its not just stale. As the bud dries, it will release moisture and increase the RH inside the tent - as it dries up there wont be as much moisture being released and this will lead to the RH inside the tent ending up very close or the same as the RH outside the tent. This can be used as a guide to further assist in telling how much water the bud has gotten rid of. With time and experience, you will get better at telling when its ready to be put into jars. Lots of factors to consider - a big, dense bud will not dry out as quickly as a big, airy bud or as a small dense bud for example. So drying times may differ between plants, even if they are harvested at the same time. I have never used Integra packs, I assume they're pretty much the same as a Boveda. If so, then as the pack dries out it will turn from liquid into a crystaline like powder (at least this is what it feels like). Maybe get a Boveda pack to compare.

@CreX ok great thanks. Well, even the wettest ones have been drying for more than 6 days, but @ around 52% - 64% (the 2 days of high humidity fell in that window). But there is still a very late one in it's 48 hours of darkness before chopping. What should I do with that one? (and any others that are clearly too wet for curing)? Just keep drying and monitoring/wiping mold?

@CreX just checking bud, so you mean even if the others are not snap-dry-ready yet, cut the buds and jar them? Or only the ready ones? I could put them with the 55% Integra Boost packs. Or do you mean to keep drying the ones that need time?

A new development... So cut off the affected stems, then wiped down remaining areas with copper soap solution. Dried it off well with a dry paper towel immediately after. While doing this I must have got some of the white "dust/mold" on my arm. It started to burn a little, same as my nutes do when I get it on me. So now I'm thinking there is a chance it could be nutes? Or @CreX do you think it's 100% PM, no questions

Screwit, I just went ahead and tasted a tiny little bit of Flora Bloom and Grow. They are salty, but subtle. Shit, IDK it could still be nutes on the stems... I'm wiping it off with copper soap solution and paper towel just in case it is mold of some kind (very careful not to get close to buds). Putting it back in the dry tent and getting RH low as possible... Best I can do for now I think

ROTFLMAO - dude you must be mindreading me because i was gonna say if you brave you could try tasting it - Mold or mildew wouldnt taste like anything other than fluff lol. open the cap of your nutes and run your pinky along the inside/underside of the cap and taste - should be identical/very similiar tasting

@Psylecta Yes, actually that makes sense. The 1st one's trichomes started going amber surprisingly early, and so they only had about 6 days of no food, just PH water. So that then makes sense why the 1st ones that went in the dry tent are getting this.... It does seem a little sparkly in the photos, like crystals of some kind, maybe nutes.... The other ones would have had 2 weeks or so flush, and that's why they are clear.... It's a hypothesis at this point but sounds plausible. Having said that I couldn't wait to try some before it was cured and it is very very smooth.... A lot of literature online says it should have been harsh but nope.... actually some of the smoothest I've ever smoked.

Yeah @Psylecta, it does look like it's fungal.... but not 100% sure... Guys I wonder if it could be residual salts/nutrients/similar staying behind as the water leaves the plant? That would tie in with why only the older, drier ones are getting this.... There's still the chance of it being DE, but then the newer fresher ones don't seem to have it.... IDK...

well its definately spore like, just by looking at the striation patterns - but as for what it is - got absolutely no clue @PsyCLown what we got here? i personally never seen this before

Here's some macros of it, maybe make it easier for ID. At first I thought it was Diatomacious Earth residual dust. But then it wouldn't make sense that it's only the ones that have been in there the longest, and the others are all fine, when I used DE on all of them. Could it be salts or similar? Looks organic and growing to me but I lack the experience

Thanks man. She does grow slow until she hits around 4 weeks, then the flowering stretch kicks in.

Looking great! I started a grow of the same, did you find the growth to be a bit slow during the first 2 or 3 weeks? Sent from my SM-N950F using Tapatalk

So both of these @1000Hills Nursery wedding cake x Smeeting are in flower now, confirmed this morning for sure that they are both female, super lucky!!! The plant behind this other WCxSM Same pot/soil amended... One layered and the other diluted with no training, I would have diluted both if I knew what I knew now about layering soil. (IT DOES NOT WORK!) Upwards and onwards, the first girl underwent some decent transplant stress but now she is doing well at least. The growth of this plant is quite substantial, if I did not mess around in the beginning, I'm sure I would have been this far in half the time, however happy to be here, I'm told this strain will put out some deep exotic colours. Roughly week 3 flower.

I think it's actually the larger one that had light deficiency. The leaves are about the same size (slightly larger on the smaller plant) but the one plant has a 10cm long stem (it shot up in the dark during the first day). I've had the bestva 600 (why they call it 600 is beyond me, they claim its equivalent to 400 Watt hps but it only draws 132 Watt) on them since and the vertical growth has all but stopped for the last 2 days.

They want R3000 for the tent...

Thanks for your feedback. Fortunately i am able to go view the tent and i will try close up the tent and view from inside to ensure there are no light leaks. It's slightly bigger than what i need at the moment but might be a good deal:)

I got some bottled nutrients from a friend that stopped growing, not too sure of the brand but I have some for veg and bloom, I'd like to get through the grow with just organic fertilizer if possible, I do have access to some compost and worm castings as well, but i figured if I start noticing anything out of the ordinary with the plants I would just ask here for advice. I'm not against using the bottled nutes if I need to.

Ye, thanks. The top soil is super dry but like 1cm below it still has some moisture. When should I be watering again? I figured I'd water about a cup each plant in the morning. I haven't tested the ph of the koi pond water. I got a test kit today so will check it tomorrow. I would assume it would have to be pretty neutral for fish to survive (maybe I'm very wrong here)?

Im using a bestva 600 led

Aweh fellow greenfingers, 1-2. This F1 Purple pineapple stacking very well. Terps are a funky and fruity, she is stacking well and hopefully she puts on weight in the right places. 3. Chocolope bagseed ''opslag'' girl decided to reveg out of the blue. Her colours are just on milky, think I'll harvest all but 2 reveg colas and then cut some clones. Like her spicy terps profile. 4. 2 more Purple pineapple girls that are going to donate some clones in the name of science.... 5-6. Next gen babies.... Bubblegum, White widow and Fruitpunch f4's. They are looking a bit worse for wear due to a spidermite problem, had to dose them hard with a soap/canola mix. But they are pulling through. 7-8. Swazi gold...ishhh bagseed girl doing well despite the mites. Mother nature hasn't been playing fair the last 2 months. Week long rainy spells, sky high RH mixed with 36 to 39deg days in between. Talk about hell and high water, got a oscillating fan for the greenhouse to help with ventilation etc. 9. At least the tomatoes are bearing fruit.....

@greenkush bro. How do tease us so bad. . What a run this was suposed to be for us.

Bonsai BBG Christmas Trees

@afternoon blazer Nice grow bru Hope you enjoy the "flowers of your labor...