Leaderboard

the trim bag works really really well. you have to play around with a few things like, how dry yur bud is when it goes in - too wet and the bag does little, too dry and you stand tha chance of rubbing your nugs past the point you want. next is how long to tumble for - less tumbling means slightly more work on the hand pass , more tumbling can produce really nice nugs. how much per tumble are you going for - 30g tumble works fine, but the more you put in the bag to tumble at a time makes the tumble process faster and generally has nicer trimmed buds. the end user wouldnt be able to tell the difference between a bad hand trim and a good tumble job.

Hey man. I have one of the branded Trim bags. To be honest, I have no clue wether the quality would be the same or not with the cheaper one. I could only imagine that it works just as well. It's actually quite a simple idea. Friction from the material of the bag rubs off the sugars and fans. If you are trimming more than 500g a time and often, I would recommend it. Also note that there is probably quite abit of trichome damage and if you look you would notice it. But to the general public, it makes a nug look reeeeaaaaaal good. Depending on the strain, size, how dry etc. It all plays a role in wether this bag works. I have found it to work well with harder nugs and even from as small as about 1cm nugs to the giants. It will trim them all. It gets about 90% of the work done. If you do not care too much about what the trichome damage would look like under a microscope, then go for it. I also think of you are going to do extractions with the left over trim, the friction might leave behind a bit more smaller particales of plant matter and most probably would show in your colour of your extract. Hope this helps a little

The Trim Bag works well, but there is a learning curve! As @CreX said, too wet and it does not do much. Too dry and it works, but you need to make sure you do not overtumble it when it is very dry. You actually want the bud to be pretty dry and then rehydrate it afterwards. I find this works the best. If there is too little bud in the trimbag, it does not work as well. If there is too much in, then also it does not work as well. The number of "tumbled" or "rotations" will also determine how your bud ends up looking. Tumble it a lot and you start to take away the outer of the bud and you get a more rounded looking bud - some pics on Instagram have this look to them. Generally this leads to les trimming and more just neatening up and getting rid of some crowfeet. Less tumbles can still remove A LOT of trim and leaf, however leave you with a bit more to trim by hand but will give you more of a hand trimmed look with a lot less effort. Trichomes do not take as much of a knock when done this way. So there is a learning curve, once you get the hang of it - it works well and can save you a lot of time. I doubt you will notice any difference in terps of potency when using the trimbag compared to a hand trim... unless you really go overboard and start tumbling your bud into a powder. lol

I will be giving the trim bag a go with my current harvest courtesy of @The Grass Baas The downside for me could be the total gram per plant that might be a little on the low side but will give it a go nevertheless as I hate trimming

I know of only one place that rents them and that's a place called Hydro Cult in Moreleta Park in Pretoria. This was before the pandemic though and I haven't been there since, but the point is that there are places that would rent them out.

Agree with the above and also contradicting my previous comment on these bagsUnless you're supplying to a dispensary or growing purely for bag appeal, knocking off a couple of trichomes to save loads of time and effort, probably wouldn't make such a huge difference in your end product. The purists way of thinking i guess. I'm willing to give it a try, but not at R2000/R4500 a pop. Come to think of it. Does anyone know where to rent one of these or those bowl trimmers?

It's definitely a solution for quantity in my opinion. If you're a one-man operation doing more than one big flower tent at a time and you don't have the hours in the day to do the big trim work, it's definitely a helper. I can imagine that the trim you get out of a Trim Bag will have more trichomes come out with it due to the method used. So you might lose some trichomes on your buds, which at the end of the day might be quite negligible in terms of its effect or high, but you'll gain somewhat with your trim I think.

The clones are Jet Fuel, whose lineage is some Kush, a bit of Haze and a whole lotta Diesel, so just up my street.

Received some clones in the mail... Thanks Canna Clone, we've certainly advanced from anxiously waiting for crazy expensive seeds to slowly ship in from overseas...

Hectic wind and the heatwave just after one another really battered the babies. But they will bounce back with a few scars. They handle the wind far better than the taller photos. These two got really beaten to shit. The tall one that was in the other corner got pulled last night and fed to the chickens. Every part of it looked broken or torn up and its still not in flower. If I started autos in that pot today I would still beat the one I pulled to the finish line. But I put 2 T1000 clones in her place. At the back everything is going ok. They didnt get the hectic wind. Trimmed then a few days ago.

Little sample nug of Beach Wedding that came in at 0.9g. Smell is sweet fruity biscuit with vanilla and butter. Dayum!

Planted my seeds just waiting for them to pop up

That is my plan, just need to get off my ass and find time to turn my trim into some hash. Got everything, just need the time to do it now. Haha Sent from my Redmi Note 7 Pro using Tapatalk

I’m trying my hand at Hash (cold water and bags) later this week. I’ll hopefully be able to use the trim from the trim bag for hash.

Thanks for the info, that’s why this forum rocks. I think I’ll give it a go. I’ll probably be loading 150g per tumble, as I like to keep each plant in its own bottle. Some of the nugs are quite small, but most are fairly dense. It’s going to save me a shed load of time….

Just a quick note for the organic growers, you can do organic with autopots with great results, infact there's some debate weither or not organic in autopots grow faster and bigger than synthetics, from my previous grow comparing them both it definitely seemed to be the case but I won't go into much detail at this time (there's some articles on the net already covering this) So there's two main ways of using organic with autopots, 1. adding layers of ammendments throughout the soil and than top feeding when needed (I suggest turning the system off for a day so not to flood the trays) or 2. using liquid nutes in the tank with bigger valves (valve 5s). For op growth I would suggest investing in bigger valves regardless of what method you use and the new 20L fabric pots. The autopots have made my grows a "sit back and enjoy" vibe. Only going into the room once in awhile to check for any leaks or to top feed.

I saw that also. Not too many reviews around on the net that i've seen. Interesting concept. Just can't get to terms with shaking/twisting my fragile trichome loaded buds around in that thing and ending up with a damaged harvest after months of hard work.

Tip #1: If you plan on LST or any other process that required tethering to the pot, drill a series of holes along the outer rim of the pot. Do this before you fill the pot! I considered drilling right through to the inner pot but this would cause leaks if the water were to reach those points before subsiding. Tip #2: If you plan on using an air dome in the pot, fix a small cable tie in one of the corner holes to hold the air line nice and snug to the pot. This reduces the chances it getting accidentally caught and pulled out of the air dome, it can’t be reattached without emptying the whole pot which will surely cause the plant some super-stress.

Still having issues with the freakshows. Yellowing still a issue with the one in the back corner. Doing the math and thinking this might not work.

I started with some seeds I got from a bud that was gifted to me. I don't know what they are just know it's cannabis 3 out of the 4 have germinated and I have 3 more in water that I'll put in some cotton later today. I'll update as I go and your advice is welcome!

I’m hoping to get some feedback from anyone who has tried using a Trim Bag to trim their dry buds. I can’t find a minimum bud size that is recommended. I’ve also noticed when searching, that some vendors have an unbranded version for around 2k whereas others have the branded one at between 4.5 and 5k ex courier. Can anyone tell me if the bags are identical or is the cheaper one a poor quality knock-off?

So you have the original brand TrimBag? I am interested, I’ll send you a message.

I’m glad you brought up the bottom or top feed for the autopot. I see that as a solution to growing multiple strains on one reservoir. I’ve had it before where one strain goes into pre-flower faster than others… up to now I’ve had to decide on a compromise because it’s one reservoir for all. Now by top feeding the pre flower plants with a suitable nutrient ratio, the rest can catch up when ready…. Great idea.

I own one, and used it once Love it, but my plants are small, and not enough to use in the bag to get a good working, and therefore still hand trim. But a large amount, and your sorted out. It hardly does much more damage than anything else, but yeah you'll have some waste. Dry buds, properly dry, are best. I'm also selling mine, if you interested. The cheaper one, is made local, and not the same in my opinion.

Aaah the boys from Hydro Cult... Nice... Bought some of my very first growing supplies through them.

20 X PKBR into BioLeaf. I plan to aggressively top the plants to prevent them from getting as tall as the previous grow, lost a fair amount of yield due to height even with running the blue spectrum. May need to run it longer into the initial stretch. As per the title will be testing out canna coco nutrients. They're currently under 2 x 720 watt fixtures dimmed down to 20% with a mix of blue diodes to stretch prevention. A few of the clones are a bit taller which will just be kept short until the rest catch up. I plan to use 2-3 nets for structural support this round as well.

Howzit fellow growers! I am nearing harvesting time and need some urgent advise on drying my whole plant vs wet trimming then hanging separate branches vs wet trimming and removing buds and using a drying rack. My drying room's humidity is 60% - 75% and temps average about 23 degrees Celsius. Will use a fan on a timer for air circulation (electricity saving) but unfortunately a dehumidifier isn't an option at the moment. The plants are hybrids and the buds are diiiik so the dreaded mold is my biggest concern. Any input would be greatly appreciated

I can't find anyone renting trimmers online. I'm in Wes Kaap if anyone knows of anyone?

I am honestly considering this, but I am in Port Elizabeth

Eishh... RH on the north coast is between 80-100%, especially with all the rain. Aircon can only reduce RH to 65%. Wet trim as always.

Problem using ac to drop the temps into a nice low range is that it then the humidity plummets. I had my ac at 20’C and that caused humidity to drop into high 30’s / low 40’s. So pushed it up to 22’C now humidity is sitting around 52% which is still a bit on the low side. So I added a humidifier to kick in at 50% which just tops it up if the ac is working hard.

The ideal temp is 16c, it's very difficult to do that during the hot season without an aircon, 23c isn't bad at all and and RH is on point, I would still dry trim for that extra moisture. Without an aircon or someway of bringing down the temps, our best bet is to focuss on RH and dry trim.

Yeah the fat leaves are completely normal another note of interest, not sure if you watered right before photo was taken, but the medium looks quite saturated and that little plant is very young still, it's easy to cause stress or stunt root growth on a young plant if there's a lack of oxygen at the roots. if you're growing in organic medium it's quite important to let the medium dry before watering again and when you do water to not completely saturate the medium, but rather just give what the plant can use. for small plants like those I usually go around 250ml to 500ml only when the medium is dry. the roots must do some work to go looking for the water, the more you get the roots moving the more the plant will grow up top.

I’ve just seen this older post. My salt dehumidifier didn’t work as well as hoped. It might have absorbed some moisture but not enough to be expelled in liquid form. It probably needs a very very damp environment to work properly. I ended up buying another dehumidifier instead.

1st week of flower done. The stretch is on.

So I have nothing to worry about? Sent from my iPhone using Tapatalk

Proper Indica

Why are my leaves so damn huge and wide? Sent from my iPhone using Tapatalk

Picked up a Autopot setup myself not too long ago now. So far it has been a game changer for me. Just the ability to shave down hours of watering and feeding into a quick 20-minute session for all my plants. I also went for the airdomes for all the 15L Autopots I use. I started growing cannabis in the beginning using DWC so the ability to mix the best of both worlds while still using a solid medium was too much to pass up. I am very impressed with the system so far.

Hi folks. So the weather has been helping me out to get a very decent slow dry on the plants and keeping the temps nice and low. 6 of the 8 ladies came down on day 67 of flower. Those were the white bubblegum, white afghan skunk, purple dosidos, blunicorn, jelly breath, osg cheese. These have been drying for 7 days now.. The sunset sherbet came down on day 70 and SSH will come down tomorrow on day 75. I am already very excited for the next run which will feature a couple more OSG strains, I wil share the names a bit later. Here are some drying pics as well as a last shot of the SSH before she comes down. Hanging around Super Silver Haze 98

I am looking at moving over to Autopots to try out, so definitely interested in your feedback, tips and tricks.

Eco BB is also your friend spray your plants drench your soil.

The deficiency on all the Gorilla Zkittlez seems to have resolved. The whole tent is looking pretty good at the moment. We are in week 3 of flowering. Gorilla Zkittlez Zkittlez x Purple Punch ..and now, some bud pics for @John Stonedwell these are from the previous ZxP harvest, cured now two weeks.

Not much to update here on week 10, been a slow 2 weeks, but cant blame the plants, its been hot and yucky lately. The Ginger tea is finishing up nicely, might get the chop sooner and SSC slower behind, but is a huge plant and is still maintaining good health, so I don't have a reason to cut her yet. Will probably let them go another week or 2

Plain water for a week or so, then I think it's chop time.

Update on the deficiency on the Gorilla Zkittlez. Three of them have bounced back well, two are still in the swing of bouncing back and one seems to be struggling just a bit, but yellowing has stopped progressing. I have given the three plants that are lagging another round of top feed. I think this will get the job done on the two, and I will just need to keep an eye on the one straggler.

Screw the focus on the scale... I want the focus on those big dense sugary coated fat ass nugs bro

I don’t know how effective it is, but why not try a home made salt dehumidifier? You can find out how on YouTube or this link https://www.amfam.com/resources/articles/at-home/how-to-dehumidify-your-home I built one cheaply using a round rubbish bin and a large round plastic perforated bowl which fits in the top. (The bowl is more like a large flour shaker / sieve). You then buy a 50kg Rock Salt from TWK (mine is sold as a cattle supplement, evidently they dig raw salt) even though you only need maybe 5-10kg at a time. Put the salt in the top and water will eventually drip down into the bucket. Sent from my iPhone using Tapatalk