Sacred Seeds

My back is already buggered, it doesn't get better after 40 I guess! When I'm done with new door then I will consider putting it upright. I've already cut the board with the holes for ventilation. I'm not sure if I should use 1 or cut another 2 passive intakes. I glued backing material over the passive intake to keep dust out. I've given my brother my design for a wooden carbon scrubber which I will attach on the inside. The door will most probably be very heavy but I will be mounting it on the existing freezer door hinges which is solid. (It's looking more likely that the Chest Freezer would be standing up right) I'm already worried about the amount of heat the 2 CFL's will make when the door is closed and also how to control humidity. Temperature inside the Wendy house is currently at 16 degrees Celsius, so I'm hoping that the cold air that is pulled in via the passive intake would keep the temperature low. As I only have 1 current E40 fitting, I'm going to have to test 1 CFL with a closed door with the fans on to see what the minimum and maximum temperatures would be overnight inside the grow cab. I currently have the cheap chemical PH kit as I cannot afford a digital one yet. Considering that I'll be using a mini 2 pot DWC kit and one 15L Autopot with separate reservoir. How I'm going to fit it all in the grow box is another issue. How important is an EC Meter and is there an alternative way of checking EC readings?

I found this picture online. This is what I will try and mimic.

Ok it seems I have most of the material needed. The freezer is 1.4m length x 0.600 width x0.800 deep. If I put the chest freezer upright then I will have very little floor space to work with. If its standing as normal then height may be a bit of an issue. The compressor packed up so I cannot use it. I don't want to damage the freezer in any way so that I can replace the compressor and have a working chest freezer again. The solution might be to leave it standing normal but to build a wooden box that fits neatly on top of the chest freezer to give the plants room to grow. I plan on removing the freezer door and making a new one out of wood, then I can fit the extraction fans and the DIY Carbon scrubber on the inside of the door. I plan on trying my hand at DWC and Passive Hydroponics. I have 2 Autoflower seeds that I bought but I wont be planting them until I have the confidence not to screw it up. Hence the reason why I started with bag seed. In fact I might not have a problem with height if I use the autoflowers in the Chest Freezer Grow Box as its shouldn't grow bigger than 50cm. How do I mask the sound of the 2 Eurolux fans? I will get started and ask my bro to start helping me asap. Thanks for all the advice thus far.:thumbups

Can the neighbors see you moving around the wendyhouse? NO Does the planking have any rot? Gaps can be sorted. NO ROT Will you have unexpected visits from anybody, landlord etc. NO, NOBODY VISITS ME EXCEPT MY BROTHER WHO SMOKES WITH ME ONCE A WEEK Is there foot traffic in the veld behind the back wall? Is your yard secure? YARD IS SECURE, THERE IS LITTLE OR NO FOOT TRAFFIC BEHIND BACK WALL Does it have power, and what capacity? You will need at least 15 A. - NO POWER, ITS NOT FAR FROM THE BACK OF THE HOUSE (5 METERS) Do you have water nearby? The closer the better. YES THERE IS A TAP NEARBY Do you have the skills and tools to build what needs to be built? I HAVE SOME BASIC TOOLS AND MY BRO CAN HELP WITH THE SKILL Do you have a budget? NOT MUCH A few people in the area have wendy houses in their backyards but its for extra accommodation, so it shouldn't be a problem to make it look and sound like someone is living there. Just in case someone tries to look over the high wall. I can setup a pc in the wendy house with a webcam to record outdoor activity on the other side of the back wall. I also have an old chest freezer that I'm considering for a grow box. I also have two 150w CFL's for Veg & Flowering. I have 2 old 100mm Eurolux bathroom fans, I have another 200mm ceiling fan that's nice and quiet. I also have a very powerful and noisy Elicent 500 Chef fan. These are most stuff that I'm storing in the wendy house.

That means you will have 3 (5L) Containers filled with the Nutrients. Eg: I add 1ml of nutrient to 1 liter (4th Container) of ph'd water. Am I suppose to repeat this process with all 3 nutrients (ie. 5th & 6th 1L Containers) OR do I add 1ml of Nutrient A shake to dissolve, add another 1ml of Nutrient B in the same 1L container and shake to dissolve etc? Then I'm suppose to Ph test the combined nutrients to let say 6.5 before I hand-water my plants? Am I understanding this correctly? Please advise on the correct way to do it.

That was an interesting read. I did not know that about red cabbage.

My friend and I already started germinating some bag seed at his house so that we can get some practice. We will leave it in Veg state for at least 4 weeks before we start flowering. The whole idea is just to play around and make our mistakes and then learn as much as we can once my grow room is sorted. His wife has found his "stealth" grow in the garage and she has given him till the end of June to remove the plants. I have spoken to my wife and she agreed on condition that I convince her that I will be able to set up a grow room without anybody finding out. I'm renting a small 2 bedroom house and there is no space indoors. Most of the yard space is in front which is unused. There is no garage but there is a 5 x 2.5m wendy house at the back that we use for some storage and I use it to light up without getting noticed. Problem is I have to always make a fire (for smoke) so that the smell is not obvious. The vibracrete wall is 2.4m high right around the backyard and I only have neighbours on either side, there is an open veld behind my back wall. I will have at least half of the wendy house to utilize. This is an old wendy house so there are small gaps in-between the horizontal wooden slats and there is no ceiling. So my question is how do I make this wendy house a viable stealth grow area? Is it even possible?

Sounds good 420! The site definitely needs more traffic and some exposure. The more the merrier!

I chose Chiesel Auto (CHIESEL X 3RD Gen Automatic) & Easy Ryder (Automatic AK47 x Lowryder #2)

Welcome Van! We have IT in common and I also live in the Northern Suburbs. Continue your studies, you will NOT be sorry!

That is right Toby! Shows how high I am already! LOL:rastabanana

Hey guys, I thought I would update you regarding GreenSmokeRoom, I ordered yesterday and the 2 autoflowers has arrived at 09:30 this morning. Will keep you guys updated when I start growing. I'm currently busy building my grow box. I just hope the seeds are exactly the strains that I ordered.

Out of curiosity sake, why have you opted for the colour CFL's, wouldn't the 6500K & 2100K be more beneficial? Im not saying its wrong just want to understand why the colour bulbs? Sorry I should've been a bit clearer, its not colour bulbs. Its the 6500k red spectrum & 2100k blue spectrum cfl's.

Thank you to all for the warm welcome! I hope to be growing my first DWC with 2 plants. Due to budget and other constraints, I will be going with two 150w CFL's (Blue & Red). Once I get decent seeds I can get started... Will let you know when I start and send some pics.

Hey DeltaLabs & wallis55 I think Rosberg drove slightly better in Bahrain, he needs to talk less and drive more. Hamilton has really evolved as a driver since his debut in 2007. In MotoGP Rossi was in a class of his own, reminds me his first stint with Yamaha. Especially his first race in South Africa! This past weekend was a Spectacular motorsport weekend! I cannot wait for the next! Forza Ferrari!!!

Thank you so much for the info!

I have a 1000w Inverter that runs from my car battery which supplies power for a 32" LED + HD Decoder. The meter showing the voltage output is at about 60%. So my question is will I be able to power one 150w CFL from the same inverter? I have been told that its not as simple as adding wattage together. I don't want to damage my new CFL bulb. Ajcapetown, I'm assuming that if the inverter works for the CFL then a bigger inverter should be able to handle the HID lights.

Are there any motorsport fans around? I'm an Absolute F1 Fanatic and a HUGE follower of MotoGP. My All Time Favourite team is Scuderia Ferrari but I also support Mercedes & Sauber. My favourite drivers are Vettel, Kimi, Alonso & I also cheer for Hamilton, Bottas, Ricciardo & Verstappen. In MotoGP its all about Honda dominating but my all time favourite riders are Valentino Rossi and Jorge Lorenzo, I also support the Ducati Factory Team and Andrea Dovizioso.

How do I order from "Holy Smoke Seeds"? Where are they based? TIA:thumbups

I've been smoking weed daily for 15 years. I am an entrepreneurial hustler with a background in IT and customer service. I am a motorsport addict! Stuff I like: Colour: Red TV Series: Weeds, Weed Wars, Shameless (US), Orange Is The New Black Movie: Half Baked, Kid Cannabis, Escape from Alcatraz & All movies produced by Jerry Bruckheimer & the late Don Simpson Documentary: High Times - Ultimate Grow Guide, What If Cannabis Cured Cancer, Kings Of Cannabis Books: Confessions Of An Economic Hit Man, Freakonomics, Rich Dad Poor Dad, Cashflow Quadrant, The Secret, Nasdaq, Long Walk To Freedom I'm here to get high, have a laugh, broaden my knowledge of Cannabis and to hopefully "meet" some new online friends. Yours in Pot Sir Smokalot