-
Similar Content
-
By LitItGrown
Please Note the price is R 4,500 PER BOARD (I will settle for R 12,000 for all 3)
Selling Reason - Downscaling - I only have space for 1 in my new grow area, so I am selling the other 3. Also listed on bidorbuy with buyer protection, however more expensive to cover the site commissions.
https://www.bobshop.co.za/the-hydrodepot-480w-full-spectrum-quad-board-led-grow-light-with-samsung-diodes-dimmer-and-rachets/p/640591690
Description
The Hydrodepot Quantum Board LED Grow Light - 480W, Lm301H, Full Spectrum LEDs lets you grow what you love all year round. This product ensures that your seedlings and plants receive all the necessary light they require to perform photosynthesis regardless of the season, converting the light they capture into sugars necessary for growth.
It features highly-efficient white light quantum LED boards and thanks to its Samsung LM301H white light full-spectrum LEDs it achieves better results for vegetation and flowering of plants. Its LED lights give off less heat and are calibrated to meet the needs of plants grown indoors. The Samsung LM301H's feature white full-spectrum light thanks to 660nm LEDs.
Features
- Highly-efficient white light quantum LED boards
- Full-spectrum white light for better results and viewing
- Reliable passive cooled design
- Better canopy light penetration with diffused light
- Dimmable power supply included
- Perfect for growing herbs, flowers, leafy plants, salad greens, and microgreens all year-round
- Warm light (3500k): boosts blooming plants, makes flower bigger and vivid
Specifications
- Power 480W
- Driver Meanwell ELG-240-48AB x 2
- Includes Samsung LM301H + 660 nm + IR + UV
- Voltage Range 48V
- Input Voltage AC100-265V
- Led Quantity 1152 pcs
- Working Temperature -20 to 80 Degrees Celsius
- PPFD µmol (m2·s) 250-350
- System Efficiency 140 Lm/W
- Micromole Per Joule 2.70 µmol/J (PPFD up to 1250 PAR 15 cm from centre) - see chart below.
- Lamp Body Material Aluminium
- Board Dimensions 660 mm x 500 mm
- Heat Sink Size 660 mm x 500 mm x 4 mm
- IP Rating IP65
- Colour Rendering Index (Ra>) 80
- Correlated Colour Temperature 3500K
- Certification CE & ROHS
- Application Seed Starting, Bloom, Veg
- Has Dimmer Yes
- Lifespan (Hours) 50000
- LED Light Source Samsung Lm301H
- Grow Tent Supported 1.2 m x 1.2 m
🌱 PPFD Estimates at Different Heights
Height Above Canopy PPFD Center (µmol/m²/s) Coverage Area
12 inches (30cm) ~10001100 3x3 ft (flower)
18 inches (45cm) ~700850 3.5x3.5 ft
24 inches (60cm) ~500650 4x4 ft (veg)
These values are measured at centre; edges of the coverage area will be slightly lower.
A PPFD of 600900 µmol/m²/s is ideal for flowering; for vegetative, 300600 is enough.
What's in the box
1x Hydrodepot 480-Watt Full Spectrum LED quantum board with Meanwell drivers and dimmer
2x Set of ratchets
-
By Spaidan
Hello growers
I would love to have an opinion on this topic. Let me update you on what I have been working with. I have a one plant indoor grow inside a 80cm x 80cm grow tent. I use a 40l fabric pot with both Orgasoilux and Freedom farms soil (green bag). The bottom half I use Orgasoilux(20l) and the top half I use Freedom farms soil(20l). Throughout veg all I give the plant is Biodyne Environoc 401 (microbes), Molasses and water. This results in an extremely healthy plant.
Once I flip to flower I start using organic bottled nutrients. In the past I have used Biobizz Bio-bloom, and more recently I have used Dirty hands inc - Bio-Phos (Jamie's brand). I give 3ml Bio-Phos once a week early flower and up it to 5ml every week mid to late flower. Plus a molasses feeding every 2 weeks and stopped using Biodyne microbes 1 week into flower.
I was thinking about completely ditching bottled nutrients and going the topdressing route for flower. I was thinking of maybe topdressing a week before the flip with Jamie's elemental blend. I am just worried if it will provide enough for the plants through to harvest. I was also thinking of maybe using my own topdressing blend of Dry kelp, Gypsum, Malted Barley and Worm Castings. Would love an opinion on switching to topdressing for flower and if the elemental blend should be more than enough to take me to harvest. If you think I should just stick to bottled nutrients for flower let me know. I am going to include photo's of my 2 previous grows using the method I have stated above. Just trying to get the best quality flower possible :)
Some thoughts of mine...…
Topdressing vs Liquid Nutrients?
Biobizz Bio-Bloom vs Dirty Hands Inc Bio-Phos?
One topdressing enough 1 week before flip?
Elemental Blend or my own flowering mix?
----------------------------------------------------------------------------------------------------------------------------------
My Grow:
Medium: Top Half Freedom Farms soil (20l) + bottom half Orgasoilux(20l)
Additives and Amendments: Molasses + Biodyne Environoc 401 Microbes + Dirty Hands Inc - Bio-Phos + Mycoroot (seedling)
-----------------------------------------------------------------------------------------------------------------------------------
(Seedling)
- Solo Cup + Freedom Farms soil + Mycoroot
-Transplant in week 2 of veg to 40l
-----------------------------------------------------------------------------------------------------------------------------------
(Veg Stage)
- initial inoculant 2ml Environoc Microbes
-1ml per litre Environoc every 2 weeks
-5ml per litre Molasses every 2 weeks
-Stop Environoc 1 week into flower
------------------------------------------------------------------------------------------------------------------------------------
(Flower Stage)
-3ml Bio-Phos every week (early flower)
-5ml Bio-Phos every week (late flower)
-5ml Molasses every 2 weeks
-Stop Bio-Phos 2 weeks before harvest
-Feed molasses until harvest
-------------------------------------------------------------------------------------------------------------------------------------
Pictures below include TH seeds - Orangesicle + Trainwreck (darker leaves) and a photo of Orangesicle during veg
-
By AK-47 Gold Arabesque
First time growing photoperiods, quite excited.
Genetics
Hiroshima by Renegade Seed Co. 6 Pack
High THC, and according to the product description should deliver "high yields of dense, rock-solid buds." Hoping to achieve that.
Want to make one a mother and start learning to clone. The description says "These highly stable genetics produce two phenotypes at most." Should be easy to choose a winner to reveg.
They advise topping, which I am also looking forward to learning. Want to also try "FIM" a plant or two to experiment.
Grow Setup
Same as before. Here
~
Lets go
9 November
Seeds arrived. Also received a Promotional 2 Pack of G-Fawke.
10 November
Seeds into a glass of spring water. Onto a heating mat and into a dark cupboard to soak for 18 hours.
11 November
Seeds started showing roots. All 6 seeds popped, gently took them and placed them root facing down in Jiffy Preforma Plugs.
Covered the holes slightly and into the ROOTiT Small Propagator they go. Heating mat underneath, and gently misted with spring water. Also threaded the hygrometer reader through a ventilation hole, to see the environment reading.
I think this reading is fine for germination. Any and all feedback welcome.
Hoping for them all to push out effectively over the coming days. In hindsight I should have maybe done the paper towel method to get the roots longer, before putting them into the plugs. I've also previously had a failed germination where I watered a bit much, so just gently misting this time as to not drown/stunt the seeds.
-
By zulumonty
I need help my autoflower are 3 weeks old and haven't shown there three leaves,I put two hands perlite Two hands coco and one Hand potting soil ratio in an 8liter black plastic grow bag.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.