Jump to content

Recommended Posts

  On 5/17/2020 at 6:02 AM, Naughty.Psychonaut said:
Sweeet, got a Fem Inzane in the membrane seed from Ethos chilling in the fridge, in line for my next grow.
Will be following for sure, excited to see what happens here!
Plants are looking sexy my dude!
Haha, thanks bro... And all the best with your grow.

Can I just ask, why do you keep them in the fridge? Is it not too cold for extended periods?

I'm genuinely not sure so if you're doing it for a valid reason I may just change how I store mine.
I just have them in a metal tin in a dark cupboard as a fool proof storage method.

I'm planning to switch to flower in a day or 2.

Sent from my POCOPHONE F1 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Thanks man!

I guess the only reason I have is that the cold temp slows down biological activity, but the most important is that the temps are constant. Flux in temps will create moisture, but yeah rice is always good. I also got like 2 or 3 little rice grains in the airtight lightproof jar, that's another important thing, no light. I wouldn't recommend putting it in the food fridge though, not because of the food but you'll be opening the fridge often causing the temps to flux. Freezing them will kill them.

If you think about it, in nature the plant drops the seed before winter and the seed lays and waits till spring time. Usually two or three months spent in "cold shock" before they pop when the temps heat up.

Then again I obviously don't know how old the seeds are or how they where stored before.

I have seeds in my cupboard too, all of them are probably still viable! 

Link to comment
Share on other sites

I am no expert... but my latest harvest is from a 15 year old seed that was stored at room temperature.. All my plants from last season was anything from 5 to 17 year old seeds that was stored at room temperature.. I don't  think it's such a issue.. If it affects the quality then maybe I would of had cup winners.. But I was happy.. :-2cents

  • Like 1
Link to comment
Share on other sites

I also store most of my seeds in the fridge, I use silica gel beads to absorb any possible excess moisture.

Storing seeds properly will help increase their shelf life. You want them stored in a dry space, hence the silica or I get rice. Don't want it to get moldy or to pop pre-maturely and preferably away from light too.
The fridge I have mine in doesn't have a light, I also barely open it.
My more expensive seeds are stored in the fridge currently.
I'm able to do it, so I do it.

Sent from my Redmi Note 7 Pro using Tapatalk

  • Like 1
Link to comment
Share on other sites

My 2c says there are more of proven guidelines for any kind of storage for anything... Be it seeds or art or books. 

If you want to preserve it best, you need an environment that is not conducive to molds and bacteria slowly gnawing away at your precious shit. 

So to do that, you need a cool environment with very low humidity. 

Keep it out of sunlight... And that's the only light you need to be concerned about... Doubt you're going to store your seeds under your lights either... But a fridge/room/garage light is not going to affect your seeds in the slightest. 

So the closest to this would be a fridge in one's home. 

Valid point brought up by @Naughty.Psychonaut condensation is a problem in a fridge, so storing them in  the draw in the fridge is the better option than the fridge door or top shelf.

Also rice and silica gel absorb moisture in the air/container which will drop the humidity right down. 

If I'm not mistaken, seed banks keep their seeds at 5°C and 5%RH

  • Like 3
Link to comment
Share on other sites

Really upto you, if you're in a hurry you could flip now but a day or two won't make a massive difference imo but they're at the point where they'll now start to explode in terms of growth.
Your tent looks nice and full and they'll stretch in flower too.

They may not be very tall plants, but that's not an issue really. As long as they're trained well and you defoliate nicely to ensure good light penetration it shouldn't be too much of an issue and I don't see it hurting yields all that much.

Sent from my Redmi Note 7 Pro using Tapatalk

  • Like 2
Link to comment
Share on other sites

  On 5/18/2020 at 7:03 PM, Stinger96 said:

All my plants from last season was anything from 5 to 17 year old seeds that was stored at room temperature.. I don't  think it's such a issue.. If it affects the quality then maybe I would of had cup winners..

Expand  

Damn boooii, would it be too much to ask if you can store my seeds for me too hahah I'm just kidding brother, yeah with seed storage you have to remember it's not a peice of plastic, it's organic biological matter, obviously it's gona loose viability, even if stored "correctly". Maybe you did have some cup winner seeds laying around!

  • Like 1
  • Haha 1
Link to comment
Share on other sites

  On 5/21/2020 at 1:16 PM, Stinger96 said:

They do pretty well though...

 

IMG-20200510-WA0020.thumb.jpg.0b72489a53ebf90b45c350802bd68b34.jpg

Expand  

They sure do. 

I got a jar filled with all kinds of seeds from custard apple tree seeds to evening primrose seeds and there are a shit load of cannabis seeds in there too. When I pop those I usually get about 85-100% success, so I don't have any problem storing them in a cupboard. Mine are in the dark, cool, airtight sealed with rice, but they're "bag seed" so not always the best grows and I usually just pop them to keep myself entertained and harvest when I get a nice flower! 

What is that you growing there?

  • Like 1
Link to comment
Share on other sites

Aaand here the Ethos Strains are; Inzane on the left
 
I gave them another defoliation a couple of hours ago and I'll flip them soon. Just waiting for the to-be clones grow out a bit more.
 
Hopefully it doesn't get too crowded once flower is in full swing.
 
The first 2 pictures are the before shots, last 2 are the afters. 

IMG_20200521_173251.jpg

IMG_20200521_173309.jpg

IMG_20200521_180701.jpg

IMG_20200521_180708_1.jpg

  • Like 2
Link to comment
Share on other sites

Not too shabby man - iv just read through this thread to make sure i didnt miss anything along the way that led to your last update.

Everything looked solid, but now in this last update the plants are droopy.

i couldnt quite make out how often you feeding your ladies? you said you mix 4 different ph levels to balance the feed. but not sure if its 4 times a day or 4 times a week or less.

the droopy leaves indicate one or both of the following - over watering or a problem with your root zone. 

have you just watered or taken pics during lights off? or have you noticed any issues?

 

  • Like 2
Link to comment
Share on other sites



  On 5/21/2020 at 5:41 PM, CreX said:
Not too shabby man - iv just read through this thread to make sure i didnt miss anything along the way that led to your last update.
Everything looked solid, but now in this last update the plants are droopy.
i couldnt quite make out how often you feeding your ladies? you said you mix 4 different ph levels to balance the feed. but not sure if its 4 times a day or 4 times a week or less.
the droopy leaves indicate one or both of the following - over watering or a problem with your root zone. 
have you just watered or taken pics during lights off? or have you noticed any issues?
 


Thanks for the read, and man you have a sharp eye.

Its not over watering or root issues... I neglected them for the past day and a half, and they've missed their watering, going a day and a half too long without having a drink.

I've finally managed to get a break to give them some water after taking those pictures.

I feed the 4 different pH levels throughout the week, not 4 times a day.
Sorry about the ambiguity.

Sent from my POCOPHONE F1 using Tapatalk

  • Like 1
Link to comment
Share on other sites

  On 5/21/2020 at 6:09 PM, PsyCLown said:
I assume you've flipped them already?

 

I agree with@CreX they don't look very happy.

 

Sent from my Redmi Note 7 Pro using Tapatalk

 

 

I'm flipping them tomorrow, had to get them hydrated first.

 

I'll let them bounce back up (should be fine by morning) and from the next light cycle they will be under 12/12.

 

Their current appearance is due to my negligence...

 

Sent from my POCOPHONE F1 using Tapatalk

 

 

 

Link to comment
Share on other sites



  On 5/21/2020 at 5:41 PM, CreX said:
Not too shabby man - iv just read through this thread to make sure i didnt miss anything along the way that led to your last update.
Everything looked solid, but now in this last update the plants are droopy.
i couldnt quite make out how often you feeding your ladies? you said you mix 4 different ph levels to balance the feed. but not sure if its 4 times a day or 4 times a week or less.
the droopy leaves indicate one or both of the following - over watering or a problem with your root zone. 
have you just watered or taken pics during lights off? or have you noticed any issues?
 


I'll get some pictures up in a few hours to show you guys how they're doing.

Sent from my POCOPHONE F1 using Tapatalk

Link to comment
Share on other sites

  On 5/21/2020 at 7:10 PM, CreX said:
Lol so they just dehydrated lol

Don't give us such a heart attack yo! Lol

 

Lol my bad, I did think they looked a bit sad but I knew what was wrong so I didn't mention it in the update.

Thanks for clearing it up for everyone else

 

Sent from my POCOPHONE F1 using Tapatalk

 

 

 

  • Like 1
Link to comment
Share on other sites

Well, it's been more than a few hours but;

Greetings everyone! Lol

Update time. 

 

The tent is looking awesome right now. 

I changed the timer to 12/12 and flipped the bloom switch on as well. They're due for a feeding when the light comes on later. 

 

They're also in for a major defoliation in a few days... Let's hope it isn't too much for them to handle. 

 

So I took on a small project that took me about 45 chilled minutes to get done.

A Small DIY CO2 generator. 

 

I know some of the advantages and disadvantages of running CO2 in a tent and how to properly use it, but I figured it couldn't hurt even though I have a vented setup. I'm not gonna seal up my tent, try to control climate and all that stuff, it's just something new to do and maintain. Please don't hate, lol.

 

 

To make the generetor;

 

- I simply rinsed out a 2L bottle, filled it a bit over the label with tap water (my tap water is pretty clean @67ppm). I know distilled water is better to use but I wasn't up to waiting for some to get delivered or setting up a quick distillation apparatus. The cost is minimal this way. 

 

- I added almost a cup full of brown sugar and shook the bottle until all the sugar was dissolved.

 

- I made a hole in 1 bottle cap for the sugar/yeast mixture and hot glued a pipe in place for the CO2 to travel through as well as to serve as a detector in another bottle. 

 

- I added a 20g sachet of dry, high foam superbrew yeast to the bottle and shook it up a bit (closed with a normal cap) first to mix it up. I then screwed the cap with the single pipe onto this bottle and left it aside to allowe some time for the mixture to start reacting. 

 

- I made 2 holes in the cap for the "detector" bottle, 1 for the pipe from the first bottle submerged in water and the 2nd to channel the CO2 to the circulation fan with both pipes sealed onto the cap with hot glue. The pipe is submerged so it can develop bubbles as CO2 is being formed. This is so I can monitor how active the mixture is.

 

- I tied a small hand towel over the yeast mixture to shield it from my grow light and placed everything in the tent. 

 

 

I'll maintain this yeast solution by emptying out 70-80% of the solution out, filling it up with fresh water and adding another cup of sugar.

 

This will be done every week or so, I'll judge by how many bubbles per/s can be viewed at the detector. The process creates byproducts that will make the solution toxic to the yeast if left unattended for more than a week or 2.

 

Here's a short video on the setup;

https://www.instagram.com/p/CAgmEdQh96P/?igshid=5rkucicrj7bt

 

I'll put up a few pictures of it also, in case the link doesn't work for you.

 

I've included a few shots of the girls as well. 

 

Enjoy.

IMG_20200523_004715.thumb.jpg.45e4dfeb315400042659d57fa2045066.jpg

IMG_20200523_004722.thumb.jpg.b143872b22f0025937adfdeeba33ea42.jpg

IMG_20200523_004734.thumb.jpg.97987db0ea44c3398493f175b34bbaab.jpg

IMG_20200522_040849_1.thumb.jpg.7682940e969db18f9f65f8a3abf96946.jpg

IMG_20200522_053659.thumb.jpg.4382c2766f496cf0a2da1eb59ed7047d.jpg

IMG_20200522_053651.thumb.jpg.59ff32b46ff0d1812609c3f30f4abecf.jpg

 

 

 

 

Edited by TheUltimateNoob
  • Like 2
Link to comment
Share on other sites

Nice man, looks like a pretty neat job too!! 

Let us know how it goes. 

Iv never played with co2 but am super keen to try some things... I'll be trying the sealed room vibe so it's on ice atm so I can get everything I need lol. 

For now, I know that it must be dark dark during night cycle, and that plants absorb co2 during light cycle. 

So I'm in the fortunate position to be able to keep my flowering tent open the entire 12h to allow for a much more stable co2 concentration throughout my tend during lights on... Sure it's still only 400ppm... But it's better than a poor ventilation system. 

Kuddos on the co2 generator lol... Ten bucks says you have an alcohol brew on the way in your cupboards too? 😜

  • Like 1
Link to comment
Share on other sites

  On 5/23/2020 at 1:09 AM, TheUltimateNoob said:
Well, it's been more than a few hours but;

Greetings everyone! Lol

Update time. 

 

The tent is looking awesome right now. 

I changed the timer to 12/12 and flipped the bloom switch on as well. They're due for a feeding when the light comes on later. 

 

They're also in for a major defoliation in a few days... Let's hope it isn't too much for them to handle. 

 

So I took on a small project that took me about 45 chilled minutes to get done.

A Small DIY CO2 generator. 

 

I know some of the advantages and disadvantages of running CO2 in a tent and how to properly use it, but I figured it couldn't hurt even though I have a vented setup. I'm not gonna seal up my tent, try to control climate and all that stuff, it's just something new to do and maintain. Please don't hate, lol.

 

 

To make the generetor;

 

- I simply rinsed out a 2L bottle, filled it a bit over the label with tap water (my tap water is pretty clean @67ppm). I know distilled water is better to use but I wasn't up to waiting for some to get delivered or setting up a quick distillation apparatus. The cost is minimal this way. 

 

- I added almost a cup full of brown sugar and shook the bottle until all the sugar was dissolved.

 

- I made a hole in 1 bottle cap for the sugar/yeast mixture and hot glued a pipe in place for the CO2 to travel through as well as to serve as a detector in another bottle. 

 

- I added a 20g sachet of dry, high foam superbrew yeast to the bottle and shook it up a bit (closed with a normal cap) first to mix it up. I then screwed the cap with the single pipe onto this bottle and left it aside to allowe some time for the mixture to start reacting. 

 

- I made 2 holes in the cap for the "detector" bottle, 1 for the pipe from the first bottle submerged in water and the 2nd to channel the CO2 to the circulation fan with both pipes sealed onto the cap with hot glue. The pipe is submerged so it can develop bubbles as CO2 is being formed. This is so I can monitor how active the mixture is.

 

- I tied a small hand towel over the yeast mixture to shield it from my grow light and placed everything in the tent. 

 

 

I'll maintain this yeast solution by emptying out 70-80% of the solution out, filling it up with fresh water and adding another cup of sugar.

 

This will be done every week or so, I'll judge by how many bubbles per/s can be viewed at the detector. The process creates byproducts that will make the solution toxic to the yeast if left unattended for more than a week or 2.

 

Here's a short video on the setup;

https://www.instagram.com/p/CAgmEdQh96P/?igshid=5rkucicrj7bt

 

I'll put up a few pictures of it also, in case the link doesn't work for you.

 

I've included a few shots of the girls as well. 

 

Enjoy.

IMG_20200523_004715.thumb.jpg.45e4dfeb315400042659d57fa2045066.jpg

IMG_20200523_004722.thumb.jpg.b143872b22f0025937adfdeeba33ea42.jpg

IMG_20200523_004734.thumb.jpg.97987db0ea44c3398493f175b34bbaab.jpg

IMG_20200522_040849_1.thumb.jpg.7682940e969db18f9f65f8a3abf96946.jpg

IMG_20200522_053659.thumb.jpg.4382c2766f496cf0a2da1eb59ed7047d.jpg

IMG_20200522_053651.thumb.jpg.59ff32b46ff0d1812609c3f30f4abecf.jpg

 

 

 

 

I could be wrong, but Brewers / brewing yeast may not be the best option here, although it will certainly cause no harm.

 

When brewers yeast consumes sugars, it creates co2 and alcohol, whereas bakers yeast will focus on co2, with alcohol as a side effect. I've found that 1g of yeast per 100g sugar and 1L water seems to be a pretty fool proof recipe with plenty bubbling...

 

Sent from my CLT-L29 using Tapatalk

 

 

 

  • Like 1
Link to comment
Share on other sites

  On 5/23/2020 at 11:02 AM, CreX said:
Nice man, looks like a pretty neat job too!! 
Let us know how it goes. 
Iv never played with co2 but am super keen to try some things... I'll be trying the sealed room vibe so it's on ice atm so I can get everything I need lol. 
For now, I know that it must be dark dark during night cycle, and that plants absorb co2 during light cycle. 
So I'm in the fortunate position to be able to keep my flowering tent open the entire 12h to allow for a much more stable co2 concentration throughout my tend during lights on... Sure it's still only 400ppm... But it's better than a poor ventilation system. 
Kuddos on the co2 generator lol... Ten bucks says you have an alcohol brew on the way in your cupboards too?
Haha, you're 10 bucks out bro!... I haven't started my alcohol brew yet, lmao. I was thinking about it last night.

Sent from my POCOPHONE F1 using Tapatalk

  • Haha 1
Link to comment
Share on other sites

  On 5/23/2020 at 11:53 PM, Trailblazer420 said:
I could be wrong, but Brewers / brewing yeast may not be the best option here, although it will certainly cause no harm. 
When brewers yeast consumes sugars, it creates co2 and alcohol, whereas bakers yeast will focus on co2, with alcohol as a side effect. I've found that 1g of yeast per 100g sugar and 1L water seems to be a pretty fool proof recipe with plenty bubbling...
 
Sent from my CLT-L29 using Tapatalk
 
 
 
Lmao, I was just coming on here to say I may have made a mistake... But I didn't know there were different yeasts so I'll head out tomorrow and get the bakers one.

Anyway, I've added waaaaaaay too much yeast in this bottle, it stopped bubbling in about 24 hrs.

I've transferred the contents to a 5L bottle and added 2 more cups of sugar to keep it going as well as another 2L of water.

I was also thinking of having a bottle between the generator and detector to serve as a CO2 collection vessel... I can then add a small valve to somewhat regulate the flow of CO2, hopefully to make the entire thing a bit more efficient.

Sent from my POCOPHONE F1 using Tapatalk

  • Like 2
Link to comment
Share on other sites

  On 5/24/2020 at 3:48 AM, TheUltimateNoob said:
Lmao, I was just coming on here to say I may have made a mistake... But I didn't know there were different yeasts so I'll head out tomorrow and get the bakers one.

Anyway, I've added waaaaaaay too much yeast in this bottle, it stopped bubbling in about 24 hrs.

I've transferred the contents to a 5L bottle and added 2 more cups of sugar to keep it going as well as another 2L of water.

I was also thinking of having a bottle between the generator and detector to serve as a CO2 collection vessel... I can then add a small valve to somewhat regulate the flow of CO2, hopefully to make the entire thing a bit more efficient.

Sent from my POCOPHONE F1 using Tapatalk

Great idea to regulate output, that is definately an easy Diy. You could even use an 'air regulator' for fishtanks.

Key things to remember

1. Dissolve all sugar, use a stove top if needed. I normally just boil the kettle, +- 1.7L, dissolve my 500g - 600g brown sugar.

2. Ensure sufficient oxygen. Yeast needs oxygen and sugar to create Co2. Using a 5L bottle, shake up the remaining 3.3L or use an airstone and pump to add O2.

3. Add dissolved sugar mixture to cold water. Once sugar has been added, you can once again give it a good shake, ensure proper mixing whilst adding O2 by means of shaking

4. Temperature, you want your water temp to be around room temp, if the water is too hot, it will kill your yeast, same goes for cold water. When water is right temp, add your yeast. 5g per 5L, but using those 7g anchor sticks, will work just fine.

5. Do not shake the bottle after adding yeast, you can after 15mins,turn the bottle a few times to mix, but don't shake.

6. Water trap. It is quite important to make sure no O2 can get back into your mix. A pinhole or 2 in the lid of a cooldrink bottle will also works.

Good luck and use that brewers yeast to make some cider :). Brewers yeast is hard to come by at the moment.

Sent from my CLT-L29 using Tapatalk

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Pineapple Express
      Full Indoor & Full Hydro Grow Set-Up for sale - R13,000 each (or R 22 000)
      Got 2 x full grow setups, one indoor soil setup and one hydro setup.
      Whatsapp: +27 60 546 2660
      What's included in each set:
      1x Grow Tent 1.2m x1.2m x2m
      1x Lumii 720W LED 6 bar Grow Light
      6x 25l Grow Buckets OR 6 material grow bags
      1x Hydroponic pump with connecting pipes (For hydro setup only)
      1x HighPro Extractor Fan 
      2 x Oscillating Clipfans
      1x Digital Min Max Hygrometer
      1x Grow Net 1.2m x1.2m 
    • By Spaidan
      Hello growers
      I would love to have an opinion on this topic. Let me update you on what I have been working with. I have a one plant indoor grow inside a 80cm x 80cm grow tent. I use a 40l fabric pot with both Orgasoilux and Freedom farms soil (green bag). The bottom half I use Orgasoilux(20l) and the top half I use Freedom farms soil(20l). Throughout veg all I give the plant is Biodyne Environoc 401 (microbes), Molasses and water. This results in an extremely healthy plant.
      Once I flip to flower I start using organic bottled nutrients. In the past I have used Biobizz Bio-bloom, and more recently I have used Dirty hands inc - Bio-Phos (Jamie's brand). I give 3ml Bio-Phos once a week early flower and up it to 5ml every week mid to late flower. Plus a molasses feeding every 2 weeks and stopped using Biodyne microbes 1 week into flower.
      I was thinking about completely ditching bottled nutrients and going the topdressing route for flower. I was thinking of maybe topdressing a week before the flip with Jamie's elemental blend. I am just worried if it will provide enough for the plants through to harvest. I was also thinking of maybe using my own topdressing blend of Dry kelp, Gypsum, Malted Barley and Worm Castings. Would love an opinion on switching to topdressing for flower and if the elemental blend should be more than enough to take me to harvest. If you think I should just stick to bottled nutrients for flower let me know. I am going to include photo's of my 2 previous grows using the method I have stated above. Just trying to get the best quality flower possible :)
      Some thoughts of mine...…
      Topdressing vs Liquid Nutrients?
      Biobizz Bio-Bloom vs Dirty Hands Inc Bio-Phos?
      One topdressing enough 1 week before flip?
      Elemental Blend or my own flowering mix?
      ----------------------------------------------------------------------------------------------------------------------------------
      My Grow:
      Medium: Top Half Freedom Farms soil (20l) + bottom half Orgasoilux(20l)
      Additives and Amendments: Molasses + Biodyne Environoc 401 Microbes + Dirty Hands Inc - Bio-Phos + Mycoroot (seedling)
      -----------------------------------------------------------------------------------------------------------------------------------
      (Seedling)
      - Solo Cup + Freedom Farms soil + Mycoroot
      -Transplant in week 2 of veg to 40l
      -----------------------------------------------------------------------------------------------------------------------------------
      (Veg Stage)
      - initial inoculant 2ml Environoc Microbes
      -1ml per litre  Environoc every 2 weeks
      -5ml per litre Molasses every 2 weeks
      -Stop Environoc 1 week into flower
      ------------------------------------------------------------------------------------------------------------------------------------
      (Flower Stage)
      -3ml Bio-Phos every week (early flower)
      -5ml Bio-Phos every week (late flower)
      -5ml Molasses every 2 weeks
      -Stop Bio-Phos 2 weeks before harvest
      -Feed molasses until harvest
      -------------------------------------------------------------------------------------------------------------------------------------
      Pictures below include TH seeds - Orangesicle + Trainwreck (darker leaves) and a photo of Orangesicle during veg
       
       



    • By AK-47 Gold Arabesque
      First time growing photoperiods, quite excited. 

      Genetics
      Hiroshima by Renegade Seed Co.  6 Pack

      High THC, and according to the product description should deliver "high yields of dense, rock-solid buds."  Hoping to achieve that.
      Want to make one a mother and start learning to clone. The description says "These highly stable genetics produce two phenotypes at most." Should be easy to choose a winner to reveg.
      They advise topping, which I am also looking forward to learning. Want to also try "FIM" a plant or two to experiment. 
      Grow Setup
      Same as before. Here
      ~
      Lets go 
      9 November
      Seeds arrived. Also received a Promotional 2 Pack of G-Fawke.

      10 November
      Seeds into a glass of spring water. Onto a heating mat and into a dark cupboard to soak for 18 hours.

      11 November
      Seeds started showing roots. All 6 seeds popped, gently took them and placed them root facing down in Jiffy Preforma Plugs. 
      Covered the holes slightly and into the ROOTiT Small Propagator they go. Heating mat underneath, and gently misted with spring water. Also threaded the hygrometer reader through a ventilation hole, to see the environment reading. 
      I think this reading is fine for germination. Any and all feedback welcome.

      Hoping for them all to push out effectively over the coming days. In hindsight I should have maybe done the paper towel method to get the roots longer, before putting them into the plugs. I've also previously had a failed germination where I watered a bit much, so just gently misting this time as to not drown/stunt the seeds.
       
    • By Stinger96
      Below some pride from Ethos Genetics.
      Boo Berry

      Velvet Underground.

      Catalina Wine Mixer.

      Grown in Organics Matters with GreenHouse Feed and under 720 Lumi Black LED.. Some UVB added and some deep red..

    • By Ziyaad
      Hey guys , I have a mars hydro grow tent up for sale . The tent is perfect condition and only used for 2 grows .Reason for the sale I am no longer growing. I paid R4900.00 exl delivery. Since I'm no longer in need of it I'm letting this baby go for R3200.000 slightly neg what a steal and saving. Soooo if you interested hit me up on primary contact 0722161092 or secondary contact 0798525919 calls/what's app and e mails welcome let's talk. Happy growing cheers
×
×
  • Create New...