Felix Posted May 20, 2015 Share Posted May 20, 2015 Hey. So I have managed to score 9 large cfl bulbs. I have a veg/clone cabinet I'm building. It is 0.6x0.8x1.8m. I have never used cfl before and need to know how many of each I should stick in there. I have 3x 85w 6500k bulbs 5x65w 4500k bulbs and one 105w 6500k. What should I put in the cabinet. It will be only veg and cloning to supply my tent? Thanks Quote Link to comment Share on other sites More sharing options...
Guest Maxwell Posted May 20, 2015 Share Posted May 20, 2015 As many as you can keep cool imo Quote Link to comment Share on other sites More sharing options...
Guest spootch Posted May 20, 2015 Share Posted May 20, 2015 Hey frog man, 9 bulbs seems excessive and gonna put out some kinda heat ! I built a veg/clone cab and only have two 32w and one 85w 6500k cfl lights and its working great. There is a pic if it up somewere. Does not have a lot of hight but with cfl u have to have the light right on the plant so there's no point really going to high anyway ? That's my 2 cents ! Happy growing Quote Link to comment Share on other sites More sharing options...
Green Leaf Organics Posted May 20, 2015 Share Posted May 20, 2015 I would first test the lux or lumen output of those bulbs. The eye isn't a good test at light output and even cfl looses lumens over time. Cheers Reaf Quote Link to comment Share on other sites More sharing options...
Felix Posted May 20, 2015 Author Share Posted May 20, 2015 Thanks for the advice. Any idea what the effects to my grow would be if I put four of the warm white cfls under my scrog canopy. I run two 300w full spectrum led panels in a 1.2x0.75x2m at the moment Quote Link to comment Share on other sites More sharing options...
Toby Posted May 21, 2015 Share Posted May 21, 2015 IMO, I would focus my light on top of the canopy. That is where your buds develop. Generally you clean the under growth so all the energy of the plant is focused on growing buds and not small side growth. Quote Link to comment Share on other sites More sharing options...
Felix Posted May 21, 2015 Author Share Posted May 21, 2015 IMO, I would focus my light on top of the canopy. That is where your buds develop. Generally you clean the under growth so all the energy of the plant is focused on growing buds and not small side growth. Thanks Toby. I jus got all these lights and not enough weed for the lights. Will remedy that on my next grow. So which bulbs and how many should I add to the 2 300w led panels Quote Link to comment Share on other sites More sharing options...
Felix Posted May 21, 2015 Author Share Posted May 21, 2015 So I have decided to start with 2x85w 6400k cfl. I'll add more if I see its needed. Stage 1 of my DIY light reflector Quote Link to comment Share on other sites More sharing options...
Green Leaf Organics Posted May 22, 2015 Share Posted May 22, 2015 Hi bud Is that tin foil you used ? Quote Link to comment Share on other sites More sharing options...
Guest kaiju Posted May 22, 2015 Share Posted May 22, 2015 Choosing the right surface for the walls of your grow room is very important, as up to 40% of your total yield comes from the edge, and the right wall surface can increase the amount of light those plants receive by up to 30%! Artificial lighting diminishes exponentially with distance, so it is important to ‘contain’ as much of this light as possible, and direct it accordingly. Reflective surfaces also help illuminate the lower portions of the garden, providing lower buds with light and heat energy. To get the best results with your light and walls, it is important to get the walls as close as possible to your garden to ensure the least amount of light is wasted. As a caveat, the percentages provided are only useful as a general guideline, as they present the range of reflectivity of the particular surfaces. The high percentage presents the best possible circumstances for that material (for example a 99% reflectivity rating for mylar sheeting would be under ideal conditions - no creases, completely flat, no discoloration, etc). The best way to determine how well your grow room walls reflect light would be to purchase a light meter and measure your light directly; then take an opaque board and hold it a few inches off one of your walls with the light meter below the board in such a fashion that the light reflects off the wall and onto the light meter. You can then compare the difference between the two and determine a percentage from those numbers, the closer the two numbers are, the better your wall reflects light. It is important that in both measurements, your light meter is the same distance from the light, otherwise your results will be skewed. Also important to note is that radiant light energy refers to electromagnetic (EM) radiation with a wavelength between 400-700 nanometers (nm) and radiant heat energy correlates to EM radiation with a wavelength between 800-2000nm. Listed below are some of the most commonly used materials used for grow room walls: Foylon: A more durable version of mylar, made of spun polyester fabric and reinforced with foil laminate. Foylon is resistant to most solutions, won't tear or fade, and can be wiped or washed clean. A great solution for growers who are interested in long term use, and though it may be slightly more expensive than mylar, its durability will more than make up for its cost. It has the ability to reflect about 95% of the light and approximately 85% of the heat energy, so a good ventilation system should be used in conjunction with folyon. A recommended method to attach Foylon to the walls would be using Velcro, as it makes taking it down for cleaning much easier nd reduces the risk of tearing, creasing or bending it. If this is used for your walls, making sure you get it flush with the wall with no pockets of air between it and the wall to prevent hotspots. Mylar: A highly reflective polyester film that comes in varying thickness, the most common being 1 and 2 mm thick. The 2mm thick mylar while not quite as durable as the foylon, is fairly rugged. The 1mm thick mylar tears fairly easily, so taking it down for cleaning is quite difficult without damaging it in the process. Both types of mylar are able to reflect approximately 92-97% reflective, giving it the potential to be more reflective than foylon, but because foylon is more easily cleaned without damaging it as well as it being harder to crease, foylon usually ends up being slightly more reflective. Important to note is that mylar reflects radiant heat energy just as well as foylon (around 85%), so proper ventilation is necessary if mylar is used in your grow room. Attaching this to walls can be done in a similar fashion as foylon, and the same caution should be used to avoid creating hotspots in your room. The 1mm thick mylar stands a fair chance of being creased or ripped in the process unfortunately, even if Velcro is used to attach to the walls. C3 anti-detection film: A specialized type of mylar that exhibits the same properties as the 2mm thick mylar, but in addition to reflecting approximately 92-97% of the light, it also is 90% infrared proof, making your grow room all but invisible to IR scanning. This can also be attached in the same manner as foylon or mylar, and the same caution should be used to avoid creating hotspots in your room. Flat white paint: Self explanatory; a great option for large grow rooms or for people who are interested in a low maintenance wall. Flat white paint has the ability to reflect between 75-85% of the light, and does not create hotspots. Adding a fungicide is recommended when painting. Glossy and eggshell whites not reflect light as efficiently as flat white. Semi-gloss paint for example, only has the ability to reflect between 55-60% of the light. Also important to remember when using paint is that any smears or blemishes on the surface take away from how reflective the wall is so care should be taken to avoid marking or staining the walls. Titanium white paint is very reflective; however it is usually only used on reflectors due to its high cost. Elastomere paint (info by furun) A rubberized roofing paint with 90% reflection. Good for growboxes. Mildew resistant. Highly reflective. Kool Seal White Elastomeric Roof Coating ~ $15.00 (1 Gallon) Ultra high reflectivity Forms a rubber-like blanket that expands and contracts Adheres to almost any surface (very good on wood and metal) Available @ www.lowes.com White/Black plastic (also known as panda plastic or "poly"): "Poly" is useful if you are setting up a temporary grow room or don’t want to damage the walls. Poly is easily cleaned. The purpose of the black side is to not allow any light to pass through the plastic, which ensures your dark cycle remains dark. The white side is 75-90% reflective. Choose a 6 "mill" thickness of poly for maximum light blockage and duribility. If this plastic is put too close to the light, you will obviously melt it so be careful!. Panda plastic does not create hotspots. Poly can be attached to the walls by using carpenter’s nails or using tape glue or similar means. This can be used as a cheap alternative to mylar if painting your grow room is out of the question. Polystyrene Foam Sheeting (more commonly known as Styrofoam): This is excellent for harsh environment growrooms (your attic for example), provided you have a good ventilation system and a way to keep the temperatures from rising too high (an a/c unit or similar) as it is an excellent insulator. It is also a great material for use in a temporary setup or for use as a "travelling reflector" on a light mover, where weight is a concern. It is approximately 75-85% light reflective so it is comparable to using a flat white paint. Foam will not create hot spots. Rigid foam can be purchased in sheets, and can be used as a free standing wall or can be taped, glued or nailed to the wall, the last generally being the most successful method. Emergency Blankets: These are ultra thin polyester blankets that are sold in most camping stores and are constructed of a single layer of polyester film that is covered with a layer of vapor deposited aluminum. It is not very effective at reflecting light because it is so thin. Holding it between you and a light source, many small holes are noticed at the intersections of creases and the entire blanket is translucent to begin with, this coupled with the many creases that are in it when you purchase it takes away a significant amount of it reflectivity. It is very easily creased as well which also detracts from its ability to reflect light. And while it is reflects nearly 90% of radiant heat energy, it is only able to reflect around 70% of the light. The largest advantage of using this type of material is that it is very cheap and therefore easily replaced. Emergency blankets can create hotspots if not attached flush to the wall so it is important that no air gaps exist between it and your supporting wall. The easiest way to attach this is to use tape (Aluminum or metal tape is recommended), as it tears very easily once it is cut or punctured. Aluminum Foil: Aluminum foil is no more than 55% reflective - if used, make sure that the dull side is the one that is used to reflect the light. When it becomes creased its reflectivity is even lower (around 35%.) It is also very dangerous to use because it creates hotspots easily, is electrically conductive, and is a fire hazard when it is in close contact with HID lighting. Attaching this to walls is a pain and usually using aluminum tape or glue is the best way. This should only be used as a last resort, and even then its usefulness is questionable. Quote Link to comment Share on other sites More sharing options...
Guest kaiju Posted May 22, 2015 Share Posted May 22, 2015 so as you can see you would probably be better off using flat white paint than tin foil for your reflector my man. Quote Link to comment Share on other sites More sharing options...
Felix Posted May 22, 2015 Author Share Posted May 22, 2015 so as you can see you would probably be better off using flat white paint than tin foil for your reflector my man. Wow....thanks for all the info. Can I live in your head for a wile please. I will be putting mylar 2mm on the wall when it arrives and I get a chance. I have my eyes out for some off cuts of stainlees plate to make a better reflector. I had no idea aluminium is a fire hazard and a waste of light. I'll get stuck into that tomorrow. For the moment I painted the interior surface with white enamel I will recoat with mat white tomorrow when I paint the reflector. It's really just until I get to put mylar up. Again thanks for all the information and will update after the changes Quote Link to comment Share on other sites More sharing options...
Felix Posted May 22, 2015 Author Share Posted May 22, 2015 Hey Froggie Do yourself a favour, and wire an earth connection onto that reflector. Do that with anything you build yourself. No ifs or buts. Make sure that the lead/ extension cable supplying your cab has an earth wire, and connect the earth on every appliance ( light/fan/timer/ whatever) that has an earth connection. Be safe bud! Thanks for the heads up coco. Going to get some advice on how to earth everything properly. Quote Link to comment Share on other sites More sharing options...
Felix Posted May 22, 2015 Author Share Posted May 22, 2015 Hi bud Is that tin foil you used ? Yeah it is and roofing aluminium tape to reinforce the edging but if you read further in the feed there is excellent info on reflective surfaces and the dangers of using aluminium like that. I didn't know this Quote Link to comment Share on other sites More sharing options...
Green Leaf Organics Posted May 22, 2015 Share Posted May 22, 2015 Lol that's why I was asking if it was tin foil... Quote Link to comment Share on other sites More sharing options...
Felix Posted May 30, 2015 Author Share Posted May 30, 2015 Hey guys Finally got some time today to get stuck into my veg/clone cupboard. I have reworked the lights. I have a mat silver anadised spray paint that i have used on my reflector instead of the tinfoil. The entire electrical system is earthed. I have 1x85w 6500k cfl 1x65w 4500k cfl and 4x12w led grow lights. I am waiting for my mylar to arrive but for the time being its painted white with high density foam rubber on the bottom. Currently I have two holes up top with a four inch computer fan sucking on the one hole with another single hole down low. Tomorrow I get time to finish up and neaten wires etc. Just seeing what temps do tonight before I decide on insulation. This is my first cupboard so be nice when you telling me how I should do it. All criticism well come. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.